Handheld Electromagnetic Rivet Gun
Features
HH-503 System
- Two handheld riveting actuators, approximately 95 lbs each, suspended on counterbalances
- Rivets:
- Maximum rivet size: 3/8"(-12)
- Alloys: KE, D, AD
- Styles:
- Index Head (FH)
- Slug (BB)
- Universal Head (FT)
- Two capacitor enclosures, a master and slave, weighing in at 220 lbs each
- Control enclosure with a touch-panel, PLC, and power disconnect
- 144 user configured presets
- Up to six different rivet sets
- 24 grip settings per rivet set
- Grip length, voltage for each gun, triggering sequence
- External isolation transformer (220V, 50Hz)
- Stand alone rollaway frame (10ftx10ft)
- Appropriate die sets
- 500 Volts
HH-553 System
- HH-503 with increased operating voltage
- 1000V
- Each actuator weighs approximately 120 lbs
- Mass increased to reduce recoil
- Larger maximum rivet size; up to 7/16"
- Integrated with Siemens C7-636 PLC
- 144 user configured presets
- Up to six different rivet sets
- 24 grip settings per rivet set
- Grip length, voltage for each gun, triggering sequence
- Appropriate die sets
HH-54 System
- Two handheld riveting actuators weighing approximately 8 lbs each
- Rivets:
- Maximum rivet size 3/16" (-6)
- Alloys: KE, D, AD
- Styles:
- Index Head (FH)
- Slug (BB)
- Universal Head (FT)
- Two 25-foot pulse cables carrying both signal and air to each actuator
- One console enclosure weighing 330 lbs:
- Siemens touch-panel, CPU314-2DP PLC
- Two banks of capacitors (one for each actuator)
- External isolation transformer (220V, 50Hz)
- 144 user configured presets
- Up to six different rivet sets
- 24 grip settings per rivet set
- Grip length, voltage for each gun, triggering sequence
- 1000 Volts
- Appropriate die sets
